Bridges Punching Machine （European Plan）
1. Used to punch ‘U’ bridges.
2. Bridges depth can be adjusted.
3. Width varies from 3~8mm ,depending to your requires.
4. Thickness varies from 0.53~2.5mm.
5. The punching mould is rigid and flexibility.
2. Bridges depth can be adjusted.
3. Width varies from 3~8mm ,depending to your requires.
4. Thickness varies from 0.53~2.5mm.
5. The punching mould is rigid and flexibility.
欧式桥位机
FOB
1 set
200set / Month
Shenzhen
10Day
Quantity:
1. Bridges Punching Machine used to punch ‘U’ bridges.
用于冲过桥"U"型孔。
2. Bridges depth can be adjusted.
桥位深度可自行调节
3. Width varies from 3~8mm ,depending to your requires.
桥位宽度为 3-8 mm, 可根据客户要求定做。
4. The thickness of Manual punching machine varies from 0.53~2.5mm.
桥位机的可冲刀片厚度为 0.53-2.5 mm.
5. The punching mould is rigid and flexibility.
模头采用进口模具钢，韧度好，强度高。
用于冲过桥"U"型孔。
2. Bridges depth can be adjusted.
桥位深度可自行调节
3. Width varies from 3~8mm ,depending to your requires.
桥位宽度为 3-8 mm, 可根据客户要求定做。
4. The thickness of Manual punching machine varies from 0.53~2.5mm.
桥位机的可冲刀片厚度为 0.53-2.5 mm.
5. The punching mould is rigid and flexibility.
模头采用进口模具钢，韧度好，强度高。